LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Resonator Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. IMPORTANT: Do not reuse any component of the exhaust system that is corroded or damaged.
  2. Inspect the exhaust system components to determine if they can be reused.
    3. Fig 1: Locating Resonator Pipe Cut Position
    GM1468218Courtesy of GENERAL MOTORS CORP.
  3. Cut (1) the resonator pipe as close to the exhaust hanger as possible.
  4. Separate the resonator and tailpipe assembly from the hanger insulators.
  5. Remove the resonator and tailpipe assembly.
scientia non olet · About LEMON Manuals