LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Battery & Cables
    GM1804767Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Loosen the positive battery cable bolt.
  3. Remove the positive battery cable (1) from the battery.
    4. Fig 2: View Of Coolant Heater Cord Retainers
    GM898846Courtesy of GENERAL MOTORS CORP.
  4. Remove the coolant heater cord retainers (1) from the battery cover, if equipped.
    5. Fig 3: View Of Battery Air Duct
    GM899620Courtesy of GENERAL MOTORS CORP.
  5. Remove the battery air duct from the battery cover.
    6. Fig 4: Radiator Support Diagonal Brace
    GM750114Courtesy of GENERAL MOTORS CORP.
  6. Remove the battery tray brace bolts/nut.
    7. Fig 5: View Of Battery Cover
    GM755437Courtesy of GENERAL MOTORS CORP.
  7. Remove the battery cover.
    8. Fig 6: View Of Battery Hold Down Nut, Washer & Retainer
    GM755443Courtesy of GENERAL MOTORS CORP.
  8. Remove the battery hold down nut (3), retainer (1) and washer.
  9. Remove the battery.
scientia non olet · About LEMON Manuals