Removal Procedure
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
Courtesy of GENERAL MOTORS CORP.
- Remove the bolt (3) securing the battery negative cable (1) to the battery tray (2).
Courtesy of GENERAL MOTORS CORP.
- Open the battery cable harness retainer (4) at the battery tray (1).
- Remove the battery negative cable from the upper portion of the battery cables harness conduit.
- Raise and support the vehicle only high enough to access the remainder of the cable through the wheelhouse. Refer to Lifting and Jacking the Vehicle
in General Information.
- Remove the left wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front
in Body Front End.
Courtesy of GENERAL MOTORS CORP.
- Remove the bolt (4) securing the battery negative cable (3) to the engine block (1).
- Open the battery cable harness retainer at the engine wiring harness bracket.
- Remove the battery negative cable (3) from the battery cables harness conduit (2).