Removal Procedure
WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 Isuzu i-290, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket or Seat Replacement - Split Bench .
- Access the sensor through service slit provided in the carpet.
- Remove the electrical connector from the sensor.
- Remove the 2 nuts retaining the sensor to the floor panel.
- Remove the sensor from the vehicle.