LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 LS, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Power Steering Pump Bracket
    GM1201382Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering pump bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the power steering pump bracket mounting bolts.

    Tighten:  Tighten the power steering pump mounting bolts to 50 N.m (37 lb ft).

  3. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement in Engine Mechanical 2.8L or Drive Belt Tensioner Replacement in Engine Mechanical 3.5L.
  4. Install the power steering pump. Refer to Power Steering Pump Replacement .
scientia non olet · About LEMON Manuals