LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2005 >> Ascender LS, 4.2 S, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 5.3L - Introduction) >> Repair Instructions >> Brake Booster Vacuum Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Brake Booster Vacuum Sensor
    GM1488348Courtesy of GENERAL MOTORS CORP.
  1. Install the brake booster vacuum sensor grommet (2) to the vacuum brake booster.
  2. Install the brake booster vacuum sensor (1) to the vacuum brake booster.
  3. Connect the electrical connector to the brake booster vacuum sensor.
scientia non olet · About LEMON Manuals