LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.5 Y, 4WD >> Repair and Diagnosis >> Steering >> Manual Steering >> Power-Assisted Steering System >> Inflator Module >> Removal

Inflator Module: Removal

  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2. Turn the ignition switch to "LOCK".
  3. Disconnect the battery "-" terminal cable, and wait at least 5 minutes.
  4. Disconnect the yellow SRS connector located under the steering column.
  5. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a TORX® driver or equivalent until the inflator module can be released from steering assembly.
    Fig 1: Loosening The Inflator Module Fixing Bolt
    G02799153Courtesy of ISUZU MOTOR CO.
  6. Disconnect the yellow SRS connector located behind the inflator module.
    Fig 2: Disconnecting Yellow SRS Connector
    G02799154Courtesy of ISUZU MOTOR CO.
  7. Remove inflator module.
scientia non olet · About LEMON Manuals