LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.5 Y, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Power-Assisted Steering System) >> Power Steering Pump >> Installation

Power Steering Pump: Installation

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pump assembly to the pump bracket, tighten the fixing bolt to the specified torque.

    Torque:  46 N.m (34 lb ft)

  2. Install the flexible hose.

    Tighten the eye bolt to specified torque.

    Torque:  54 N.m (40 lb ft)

  3. Install the drive belt.
  4. Connect the suction hose, then fill and bleed system. Refer to BLEEDING THE POWER STEERING  .
scientia non olet · About LEMON Manuals