LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Body Structure) >> Front Door Assembly >> Removal

Front Door Assembly: Removal

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable.
  2. Apply a setting mark on the body side hinge.
  3. Remove the door check arm bolt.
    Fig 1: Removing Door Check Arm Bolt
    G02715387Courtesy of ISUZU MOTOR CO.
  4. Remove the upper and lower hinge bolts.
    • Position a wood block under the door for protection and support the door assembly with hands during removal or installation.
    Fig 2: Removing Upper & Lower Hinge Bolts
    G02715388Courtesy of ISUZU MOTOR CO.
  5. Remove the door harness connector.
    • Pull the door harness grommet out in order to disconnect the harness connector.
    Fig 3: Removing Door Harness Connector
    G02715389Courtesy of ISUZU MOTOR CO.
  6. Remove the front door assembly.
scientia non olet · About LEMON Manuals