Front Bumper: Installation
WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
To install, follow the removal steps in reverse order noting the following points:
- Tight the front bumper back bar assembly fixing bolts to the specified torque.
Torque: 147 N.m (108 lb ft)
- Front bumper adjustment.
- When the bolts fixing front bumper assembly are tightened, adjustment should be made between the back bar and front side bumper so that there is a clearance of 3 mm (0.12 in) between the top of the bumper and the fender. The angled portion of the bumper must be flush with the fender.