Engine Hood: Installation

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.

To install, follow the removal steps in the reverse order, noting the following points:

Tighten the engine hood hinge fixing bolts to the specified torque.
Torque: 10 N.m (87 lb in)
Check the engine hood and fender (1).
Clearance: 4.5 mm (0.18 in)

Height (step): Flush
- Adjust clearance with the hinges on the engine hood.
- Adjust height (step) with the hood rests (2).
Fig 1: Checking Engine Hood & Fender
Courtesy of ISUZU MOTOR CO.

Fig 2: Adjusting Clearance With Hinges On Engine Hood

Courtesy of ISUZU MOTOR CO.

Fig 3: Adjusting Height (Step) With Hood Rests

Courtesy of ISUZU MOTOR CO.