LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Power-Assisted Steering System) >> Inflator Module >> Removal

Inflator Module: Removal

WARNING: This page is about a different car, the 2003 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2. Turn the ignition switch to "LOCK".
  3. Disconnect the battery "-" terminal cable, and wait at least 5 minutes.
  4. Disconnect the yellow 2-way SRS connector located under the steering column.
  5. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a TORX® driver or equivalent until the inflator module can be released from steering assembly.
    Fig 1: Loosening Inflator Module Fixing Bolt
    G02714381Courtesy of ISUZU MOTOR CO.
  6. Disconnect the yellow 2-way SRS connector and horn lead located behind the inflator module.
    Fig 2: Disconnecting Yellow 2-Way SRS Connector And Horn Lead
    G02714382Courtesy of ISUZU MOTOR CO.
  7. Remove inflator module.
scientia non olet · About LEMON Manuals