LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Security And Locks) >> Anti-Theft System >> Anti-Theft & Keyless Entry Controller >> Removal

Anti-Theft & Keyless Entry Controller: Removal

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable.
  2. Remove the glove box from the instrument panel assembly (1).
  3. Remove the anti-theft & keyless entry controller (2).
    • Disconnect the connector.
    • Remove two fixing screws.
    Fig 1: Removing Anti-Theft & Keyless Entry Controller
    G02788267Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals