LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Anti-Lock Brake System) >> Rear Wheel Speed Sensor >> Installation

Rear Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install speed sensor (3).
  2. Tighten the sensor fixing bolt (2) to the specified torque.
  3. Torque:  24 N.m(17 lb ft)
  4. Connect harness connector (1).
    Fig 1: Installing Rear Wheel Speed Sensor
    G02787905Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals