LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Anti-Lock Brake System) >> Front Wheel Speed Sensor >> Installation

Front Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install speed sensor and take care not to hit the speed sensor pole during installation.
  2. Install speed sensor fixing bolt and tighten the fixing bolt to the specified torque.

    Torque:  7.5 N.m (66 lb in)

  3. Install speed sensor cable fixing bolt (Upper Arm and Knuckle side) and tighten the fixing bolt to the specified torque.

    Torque:  7.5 N.m (66 lb in)

  4. Install speed sensor cable fixing bolt (Frame side) and tighten the fixing bolt to the specified torque.

    Torque:  10 N.m (87 lb in)

    NOTE: Confirm that the cable is not twisted when connecting the speed sensor cable.
  5. Install speed sensor connector.
scientia non olet · About LEMON Manuals