LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Anti-Lock Brake System) >> Electronic Hydraulic Control Unit >> Removal

Electronic Hydraulic Control Unit: Removal

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove brake pipes.
    • After disconnecting brake pipe, cap or tape the openings of the brake pipe to prevent the entry of foreign matter.
  2. Remove three bracket fixing bolts.
  3. Disconnect red clip from harness connector.
    NOTE: In case a cap (red clip) is removed, there is a possibility of damaging a cap. The damaged cap must not use if for safety. Please exchange with new cap.
    Fig 1: Disconnecting Red Clip From Harness Connector
    G02787896Courtesy of ISUZU MOTOR CO.
  4. Remove harness connector.
  5. Remove EHCU ASM.
  6. Remove EHCU.
scientia non olet · About LEMON Manuals