Electronic Hydraulic Control Unit: Installation

WARNING: This page is about a different car, the 2004 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.

To install, follow the removal steps in the reverse order, noting the following points:

Torque:

Hydraulic unit fixing nuts: 22 N.m (16 lb ft)
Ground cable: 14 N.m (10 lb ft)
Brake pipe (joint bolts): 16 N.m (12 lb ft)

After installing the hydraulic unit, bleed brakes completely. See DISC & DRUM .