LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Axiom Base, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Information & Procedures >> On Vehicle Service >> Accelerator Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable.
  2. Disconnect the electrical harness from the AP sensor.
    Fig 1: Disconnecting Electrical Harness From AP Sensor
    G02788903Courtesy of ISUZU MOTOR CO.
  3. Remove the AP sensor.
Fig 2: Removing AP Sensor
G02788904Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals