LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Axiom Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Brake Switch >> Adjustment

Brake Switch: Adjustment

  1. Check that the brake pedal (3) is fully returned by pedal return spring.
  2. Disconnect the switch connector.
  3. Loosen the lock nut (2).
  4. Rotate the brake switch (1) by hand until push rod disappears from brake switch tip (4).
  5. Return the brake switch by a half turn.
  6. Tighten the lock nut.
  7. Connect the switch connector.
    Fig 1: Rotating The Brake Switch By Hand Till Push Rod Disappears From Brake Switch Tip
    G02787907Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals