LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Front Planetary Gear >> Inspection and Repair

Inspection and Repair

  1. Check front planetary ring gear bushing

    Using a dial indicator, measure the inside diameter of the front planetary ring gear bushing.

    Maximum inside diameter:  24.08 mm (0.9480 in)

    If the inside diameter is greater than the maximum, replace the front planetary ring gear.

    Fig 1: Measuring Inside Diameter Of Front Planetary Ring Gear Bushing
    G02789356Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals