LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> On-Board Diagnostic (OBD-II) >> On-Board Diagnostic (OBD-II) Information >> Tech 2 Features

Tech 2 Features

  1. Tech 2 is a 12 volt system. Do not apply 24 volts.
  2. After connecting and/or installing the Vehicle Communications Interface (VCI) module, PCMCIA card and DLC connector to the Tech 2, connect the tool to the vehicle DLC.
  3. Make sure the Tech 2 is OFF when removing or installing the PCMCIA card.
  4. The Tech 2 has the capability of two snapshots.
  5. The PCMCIA card is sensitive to magnetism and static electricity, so care should be taken in the handling of the card.
  6. The Tech 2 can plot a graph when replaying a snapshot.
  7. Always return to the Main Menu by pressing the EXIT key several times before shutting down.
  8. To clear Diagnostic Trouble Codes (DTCs), open Application Menu and press "F1: Clear DTC Info".
scientia non olet · About LEMON Manuals