LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Information & Procedures >> On Vehicle Service >> Wire Harness Repair: Twisted Shielded Cable >> Installation Procedure

Installation Procedure

  1. Splice the wires using splice clips and rosin core solder.
  2. Wrap each splice to insulate.
  3. Wrap the splice with mylar and with the drain (uninsulated) wire.
    Fig 1: Wrapping Splice With Mylar And With Drain
    G02788946Courtesy of ISUZU MOTOR CO.
  4. Tape over the whole bundle to secure.
Fig 2: Tapping Over Whole Bundle To Secure
G02788947Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals