LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Information & Procedures >> On Vehicle Service >> Vehicle Speed Sensor (VSS) >> Inspection Procedure

Inspection Procedure

  1. Inspect the electrical connector for signs of corrosion or warping. Replace the VSS if the electrical connector is corroded or warped.
  2. Inspect the VSS driven gear for chips, breaks, or worn condition. Replace the VSS if the driven gear is chipped, broken or worn.
  3. Inspect the O-ring for wear, nicks, tears, or looseness. Replace the O-ring if necessary.
scientia non olet · About LEMON Manuals