LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Ascender S, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Lower Anchor Assembly Replacement - Rear No. 1 >> Installation Procedure

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Removing/Installing Seat Belt Anchor Nut
    GM828234Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat lower anchor to the seat cushion frame with the bolt (2).

    Tighten:  Tighten the rear seat lower anchor bolt to 35 N.m (26 ft. lb.).

  2. Install the trim panel to the seat cushion. Refer to Seat Cushion Trim Panel Replacement - Rear No. 1 (Long Wheelbase) .
  3. Install the seat in the vehicle. Refer to Seat Replacement - Rear No. 1 (Long Wheelbase) .
scientia non olet · About LEMON Manuals