Front Fender Panel: Installation

WARNING: This page is about a different car, the 2003 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.

To install, follow the removal steps in the reverse order, noting the following points:

Tighten the front fender panel fixing bolts to the specified torque.
1. Torque: 7 N.m (61 lb in)
Check the fender and front door (1).
1. Clearance: 5.0 mm (0.196 in)
2. Height (step): Flush
Fig 1: Checking Fender & Front Door (1 Of 2)
Courtesy of ISUZU MOTOR CO.

Fig 2: Checking Fender & Front Door (2 Of 2)
Courtesy of ISUZU MOTOR CO.