LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Rodeo Sport 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Body Structure) >> Front Door Assembly >> Removal

Front Door Assembly: Removal

WARNING: This page is about a different car, the 2003 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable.
  2. Apply a setting mark on the body side hinge.
  3. Remove the door check arm pin.
    Fig 1: Removing Door Check Arm Pin
    G02790998Courtesy of ISUZU MOTOR CO.
  4. Remove upper and lower hinge bolts.
    • Position a wood block under the door for protection and support the door assembly with hands during removal or installation.
      Fig 2: Positioning Wood Block Under Door
      G02790999Courtesy of ISUZU MOTOR CO.
  5. Remove the door harness connection.
    • Pull the door harness grommet out in order to disconnect the harness connection.
      Fig 3: Removing Door Harness Connection
      G02791000Courtesy of ISUZU MOTOR CO.
  6. Remove front door assembly.
scientia non olet · About LEMON Manuals