Front Bumper: Installation
WARNING: This page is about a different car, the 2003 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.
To install, follow the removal steps in reverse order noting the following points:
- Tighten the front bumper assembly fixing bolts to the specified torque.
- Torque: 147 N.m (108 lb ft)
- Front bumper adjustment
- When the bolts fixing front bumper assembly are tightened, adjustment should be made between the back bar and front side bumper so that a clearance of 14.5 mm (0.57 in) is provided between the lower side of the fender and the upper side of the front bumper.