Engine Hood: Installation

WARNING: This page is about a different car, the 2003 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.

To install, follow the removal steps in the reverse order noting the following points:

Tighten the engine hood fixing bolts to the specified torque.
1. Torque: 10 N.m (87 lb in)
Check the engine hood and fender (1).
- Clearance: 4.5 mm (0.18 in)
- Height (step): 0.5 mm (0.02 in)
- Adjust clearance with the hinges on the engine hood.
- Adjust height (step) with the hood rests (2).
  
  Fig 1: Checking Engine Hood & Fender (1 Of 3)
  Courtesy of ISUZU MOTOR CO.
  
  Fig 2: Checking Engine Hood & Fender (2 Of 3)
  Courtesy of ISUZU MOTOR CO.
  
  Fig 3: Checking Engine Hood & Fender (3 Of 3)
  Courtesy of ISUZU MOTOR CO.