LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Rodeo S, 2.2 D, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Differentials & Drive Axles) >> Torque Specifications >> 1999-2002

Torque Specifications: 1999-2002

WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS (1999-2002)

Application Ft. Lbs. (N.m)
Axle Housing Mount-To-Vehicle Bolts/Nuts 124 (168)
Axle Housing-To-Mount/Right Axle Tube Bolts 85 (116)
Brake Caliper Fixing Bolt 37 (50)
Carrier Cap Bolts 72 (98)
Carrier Housing-To-Axle Housing Bolts 19 (26)
Drive Shaft-To-Pinion Flange Bolt 46 (62)
Filler Plug 58 (79)
Lower Shock Absorber Nut & Bolts 69 (93)
Pinion Flange Nut (1)
Ring Gear Mounting Bolts 80 (108)
Tie Rod End-To-Steering Knuckle 87 (118)
Wheel Lug Nut 87 (118)
Wheel Speed Sensor Lower Harness Mounting Bolt 18 (24)
INCH Lbs. (N.m) 
Gauge Set Bolt 20 (2)
Wheel Speed Sensor Fixing Bolt 95 (11)
Wheel Speed Sensor Upper Harness Mounting Bolt 66 (7.5)
(1) Non-reusable part. Replace during reassembly. Pinion flange nut is tightened while adjusting pinion bearing preload. See step  18 in REASSEMBLY under OVERHAUL.