LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Rodeo S, 2.2 D, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Trans (4L30-E) >> Speed Sensor (Extension Assembly) >> Installation

Speed Sensor (Extension Assembly): Installation

  1. Inspect the speed sensor O-ring, and replace it if necessary.
  2. Install speed sensor assembly and 10 mm screw.
    1. Torque:  9 N.m (78 lb in)
  3. Connect speed sensor harness connector to speed sensor.
  4. Install selector lever assembly (V6, 4x4).
  5. Install front console (V6, 4x4).
  6. Connect battery ground cable.
scientia non olet · About LEMON Manuals