Side Window Glass (SWB): Installation
- Install the side window glass.
- Clean the areas of the glass and body panel that are to affixed to each other.
- Apply the primer to the specified areas of the glass and body panel.
- Stick the spacer and fastener tape in place in the specified locations.
- Apply the adhesive to the entire circumference of the glass, as shown in the figure.
- Insert the glass clips into the panel and then push the glass against the panel to affix it in place.
- Wipe away any adhesive that oozes out around the edges.
- Install the side window garnish assembly.
- Insert it securely and inspect for snug fit.
- Install the side window molding.
- Insert it securely and inspect for snug fit.
- Make sure that there is no water leakage from the side window glass.
- Install the quarter trim cover.