LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Rodeo LSE, 2.2 D >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Component Removal & Installation >> Fuel System >> Fuel System Pressure Release >> Ascender 5.3L

Ascender 5.3L

  1. Disconnect the negative battery cable.
  2. Install the Fitting Tool Set (J 34730-1A).
  3. Loosen the fuel fill cap in order to relieve the fuel tank vapor pressure.
  4. Open the valve on Fitting Tool Set in order to bleed the system pressure. The fuel connections are now safe for servicing.
  5. Drain any fuel remaining in the gauge into an approved container.
  6. Once the system pressure is completely relieved, remove the Fitting Tool Set.
scientia non olet · About LEMON Manuals