LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Trailing Link >> Installation

Trailing Link: Installation

  1. Install trailing link. Make sure that the trailing link is in its correct position.
    NOTE: When mounting trailing link, be sure not to use grease on bushings or any other nearby part.
    Fig 1: Identifying Trailing Link Correct Position
    G02789742Courtesy of ISUZU MOTOR CO.
  2. Install bolt and nut. Tighten the bolts and nuts lightly, then retighten them to the specified torque after the vehicle is at curb height.
    • Torque:  137 N.m (101 lb ft)
  3. Install parking brake cable.
    CAUTION: The parking brake cable should not be overstrained or slackened.
scientia non olet · About LEMON Manuals