LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

  1. Install rubber bushing.
  2. Install bracket to axle housing and tighten to the specified torque. See Fig 1.
    • Torque:  25 N.m (19 lb ft)
  3. Install link.
  4. Install bolt and nut, then tighten the nut to the specified torque.
    • Torque:  50 N.m (37 lb ft)
    Fig 1: Installing Bracket To Axle Housing
    G02789754Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals