LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Axiom Base, RWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Driveline Control System >> Diagnosis From Trouble Codes >> Trouble Code: 42 / P1773 - Check Flow 14

Trouble Code: 42 / P1773 - Check Flow 14

TROUBLE CODE: 42 / P1773 - ERROR OPERATION CARRIED OUT UNDER HIGH LOW MOTOR RUNNING

Check Flow Trouble Code Phenomenon Standard
14 42 (P1773) Error operation was carried out under high -low motor running. ___
Fig 1: Trouble Code 42 / P1773, Diagnostic Procedure Chart - Error Operation Carried Out Under High-Low Motor Running
G02804717Courtesy of ISUZU MOTOR CO.
NOTE: Confirm the operation conditions when changing high/low range:
  • The car stops. (less than 2 km/h or 1.2 mph and engine speed: less than 1500 RPM).
  • The AT selector position is neutral.
  • The brake is applied (brake switch: ON)
  • Verify the completion of changing the high/low range by the TOD indicator on the instrument panel.
  • This code does not indicate the trouble of the transfer or ECU, and is memoried when an error operation is carried out under high -low motor running.

Therefore this code is not memoried if the transfer is operated according to "Owner's Manual".