LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Axiom Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication >> Oil Pump >> Removal

Oil Pump: Removal

  1. Disconnect battery ground cable.
  2. Drain engine oil.
  3. Remove crankcase assembly.
  4. Remove crankshaft pulley.
  5. Remove timing belt.
  6. Remove timing pulley from crankshaft.
  7. Remove four fixing bolts from oil filter assembly.
  8. Remove oil strainer fixing bolts, remove oil strainer assembly with O-ring.
  9. Remove three bolts from oil pipe and O-ring.
  10. Remove eight oil pump fixing bolts, then oil pump assembly.
  11. Remove sealant from mounting surface of oil pump assembly, cylinder block and take care not to damage mounting surfaces of oil pump and cylinder block.
scientia non olet · About LEMON Manuals