LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Axiom Base, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Valve Body Assembly (Adapter Case) >> Removal

Valve Body Assembly (Adapter Case): Removal

  1. Raise the vehicle and support it on jack stands.
  2. Disconnect battery ground cable.
  3. Drain fluid.
  4. Remove twelve 10 mm adapter case oil pan fixing screws, adapter case oil pan, and gasket.
    NOTE: Oil pan still contains transmission fluid. Place a large drain container under the oil pan.

    Drain the fluid carefully. 

  5. Disconnect wiring harness from force motor solenoid and converter clutch solenoid. Pull only on connectors, not on wiring harness.
  6. Remove seven 13 mm screws from adapter case valve body assembly, then remove transfer plate, two gaskets, and adapter case valve body.
scientia non olet · About LEMON Manuals