Column Tube

Check for collapse by measuring the distance as shown in the figure. Standard distance:  162.2-165.8 mm (6.386-6.528 in)

Fig 1: Measuring Column Tube Collapse

Courtesy of ISUZU MOTOR CO.

Column Universal Joint for Tilt Mechanism 

Check steering column assembly for any resistance by rotating the universal joint. If resistance is felt then replace the steering column assembly.

Sheared Injected Plastic Pin 

Check the sheared injected plastic pins for any loose conditions or damage.

Fig 2: Checking Sheared Injected Plastic Pins

Courtesy of ISUZU MOTOR CO.