LEMON Manuals
: Even more car manuals for everyone
Home
>>
Isuzu
>>
2003
>>
Axiom Base, 4WD
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
Engine Controls - Self-Diagnostics
>>
Diagnostic Tests
>>
DTC P1650: Quad Driver Module "A" Fault
>>
Conditions For Setting DTC
Conditions For Setting DTC
Ignition is ON.
Engine running.
Ignition voltage is more than 11.0 volts for 4 seconds.
Output voltage does not equal voltage and is not less than zero volts when out put is ON.
Above conditions occur for 20 test failures.