Conditions For Setting DTC
- No Throttle Position (TP) sensor, Vehicle Speed Sensor (VSS), Engine Coolant Temperature (ECT) sensor, Mass Air Flow (MAF) sensor, low system voltage, fuel system, EVAP canister purge, fuel injector control or ignition control DTC are stored.
- MAP sensor value is less than 60 kPa.
- EVAP canister purge duty cycle is 10 percent or more.
- Engine running time is more than 125 seconds.
- Engine coolant temperature is 122°F (50°C) or more.
- Ignition voltage is 9.5-16.7 volts.
- Barometric pressure is 74.5 kPa or more.
- Idle engine speed is more than 100 RPM and MAP is less than 60 kPa for 10 seconds.