LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Ascender 5.3 P, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Keyless Entry System) >> Repair Instructions >> Transmitter Programming >> Method 2 - Scan Tool Required

Method 2 - Scan Tool Required

WARNING: This page is about a different car, the 2004 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a scan tool.
  2. Turn the ignition ON, with the engine OFF.
  3. Use the scan tool in order to access the Lift Gate Module (LGM) Special Function: Program Key Fobs menu.
  4. Follow the directions on the scan tool in order to program the transmitters.
  5. Operate the transmitter functions in order to verify correct system operation.
scientia non olet · About LEMON Manuals