Removal Procedure

WARNING: This page is about a different car, the 2004 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.

Remove the right rear seat cushion. Refer to Seat Cushion Replacement - Rear No. 1 (Short Wheelbase) in Seats.
Remove the communication interface module. Refer to Communication Interface Module Replacement (SWB) or Communication Interface Module Replacement (LWB) in Interior Trim.

Fig 1: Releasing Retaining Tab On Upper Bracket

Courtesy of GENERAL MOTORS CORP.

Using a flat bladed tool, release the retaining tab on the upper bracket.
Slide the upper bracket inboard until the retaining tabs are released from the processor bracket.
Remove the upper bracket from the processor bracket.

Fig 2: Processor Bracket Retaining Nut

Courtesy of GENERAL MOTORS CORP.

Remove the nut that retains the processor bracket to the rear seat back stud.
Remove the processor bracket from the vehicle.