LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Ascender 5.3 P, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cellular Communication System) >> Repair Instructions >> Navigation Control Processor Bracket Replacement (LWB) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sliding VCIM Bracket To Seat Bracket
    GM829604Courtesy of GENERAL MOTORS CORP.
  1. Position the VCIM bracket to the seat bracket.
  2. Slide the VCIM bracket forward until the retaining tabs become locked to the seat bracket.
    3. Fig 2: Removing/Installing VCIM Retaining Tab
    GM829602Courtesy of GENERAL MOTORS CORP.
  3. Ensure the retaining tab (1) on the VCIM bracket is properly seated.
  4. Install the communication interface module. Refer to Communication Interface Module Replacement (SWB)  or Communication Interface Module Replacement (LWB)  in Interior Trim.
  5. Position the right second row seat to a passenger position.
scientia non olet · About LEMON Manuals