Installation Procedure

Fig 1: Removing/Installing Traction Control Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Position the traction control switch to the trim plate
Install the traction control switch to the instrument panel trim plate by seating the locking tabs.
Connect the electrical connector to the traction control switch.
Install the accessory trim plate.
- For Envoy/Bravada, refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory in Instrument Panel, Gauges and Console.
- For TrailBlazer/Envoy/Bravada, refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.