LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Ascender 4.2 S, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Brake Light Switch
    GM748017Courtesy of GENERAL MOTORS CORP.
  1. Remove the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Remove the pushrod retainer (3) from the brake pedal pin (4).
  3. Remove the stop lamp switch (1) and the pushrod (2) from the brake pedal pin (4).
  4. Disconnect the stop lamp switch (1) electrical connector.
  5. Remove the stop lamp switch from the vehicle.
scientia non olet · About LEMON Manuals