LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Ascender 4.2 S, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Headlamp Switch Electrical Connectors
    GM729433Courtesy of GENERAL MOTORS CORP.
  1. Position the headlamp switch near the access hole.
  2. Connect the electrical connectors to the headlamp switch.
    3. Fig 2: Headlamp Switch And Retaining Tabs
    GM729434Courtesy of GENERAL MOTORS CORP.
  3. Install the headlamp switch to the IP. Ensure that the retaining tabs are fully seated.
  4. Install the left IP access cover.
scientia non olet · About LEMON Manuals