LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Ascender 4.2 S, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Center Console Assembly
    GM1234306Courtesy of GENERAL MOTORS CORP.
  1. Remove the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
    2. Fig 2: Disconnecting/Reconnecting Shift Lock Actuator Electrical Connector
    GM1341666Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the shift lock actuator (3) electrical connector.
    3. Fig 3: Removing/Installing Shift Lock Actuator
    GM1199544Courtesy of GENERAL MOTORS CORP.
  3. Shift assembly to the low position.
  4. Loosen and remove the screw at the rear of the shiftier assembly.
  5. Shift the assembly to the NEUTRAL position.
  6. Loosen and remove the top screw of the shift lock actuator through the lever slot.
  7. Pull lever to the drive position and remove the shift lock actuator.
scientia non olet · About LEMON Manuals