Charge Indicator Inoperative
- Did you perform the Diagnostic System Check? If yes, go to next step. If no, see DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Turn ON the ignition, with the engine OFF observe the charge indicator on the instrument cluster. Is the charge indicator illuminated? If yes, there is a possible poor connection. Perform DIAGNOSTIC SYSTEM TEST. If no, go to next step.
- Replace the IPC. See IPC REPLACEMENT in appropriate INSTRUMENT PANEL article in ACCESSORIES & EQUIPMENT. Did you complete the replacement? If yes, go to next step.
- Operate the system in order to verify the repair. Did you correct the condition? If yes, system is OK? If no, go to step 2.