LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2002 >> Trooper S, 4WD, Part Time >> Repair and Diagnosis >> Steering >> Steering Column >> Power-Assisted Steering System >> Power Steering Pump >> Installation

Power Steering Pump: Installation

  1. Install the adjust plate and tighten the mounting bolts to the specified torque.

    Torque:  56 N.m (41 lb ft)

  2. Install the pump assembly. Connect the harness under the pump housing.
  3. Tighten the fixing bolt to the specified torque.

    Torque:  46 N.m (34 lb ft)

  4. Connect the flexible hose, then tighten the eye bolt to specified torque.

    Torque:  54 N.m (40 lb ft)

  5. Connect the suction hose.
  6. Install the pulley onto the power steering pump and tighten the nut to the specified torque.

    Torque:  78 N.m (58 lb ft)

  7. Install the air cleaner duct and the radiator upper hose.
  8. Refill the engine coolant.
  9. Fill and bleed the power steering system. Refer to Bleeding Procedure .
scientia non olet · About LEMON Manuals