Description & Operation

The circuit consists of power seat switch, front tilt motor (driver's seat only), rear tilt motor (driver's seat only), slide motor and recliner motor.

The power seat switch has a tilt and slide switch and a recliner switch.

The motor built in the seat can be actuated by operating these switches to move the seat to desired position, independent of position of the starter switch.

The circuit consists of the starter switch, seat heater switch and the heat unit.

Seat heater is provided in driver's and front passenger seats (as option) when seat heater switch is ON, seat heat built in seat back and cushion is switched on to warm seats.

To prevent seats from being overheated, the circuit is fitted with a thermostat.